Shorten Shift Arm: Now available from Spears Racing a shorten shift lever, this lever will fit onto all Suzuki SV650’s from 1999/2009 it is over 10mm shorter in length and will reduce your foot/ankle movement by over 5/8 of an inch. This will allow more positive shifts with less movement, a must for all racers. Works in Std. or GP Shift.


             SP42-650                                                                                                                                                            $65.00/Ea


Waterpump Cover: Spears Enterprises/Spears Racing, has a new product for the 2013 race season, this is a Water Pump Impeller housing cover for all SV650's this unit is machined from the finest Aluminum and will be engraved with the "Spears Racing" Logo, the unit come with all necessary hardware to mount it onto your Street or Race SV650.


             SP650-WPC                                                                                                                                                       $150.00/Ea

Bored Throttle Bodies:Spears Racing’s Preparation of the High Flow Throttle Bodies is a multi-step process that includes:boring, custom fit CAD designed throttle blades, reducing shaft profile (If needed), installing button head screws,milling topside and tumble polishing. By increasing air flow up to as much as 15 %, our throttle bodies improve low-end and mid-range power. This increase is immediately noticeable to the Racer/Rider.


           SP22-650 Throttle Bodies                                                                                                                              $400.00/Set

    

Woodcraft Two-Piece Split Clip-ons: Woodcraft's trademark two-piece body clamp makes for the easiest installation and removal of any clip-on on the market. Never again dis-assemble your front end. The universal replacement bars save as much as $100 per crash when many one piece OEM units require complete replacement (and subsequent front end disassembly). Extra time was taken on these pieces to make them super-light and add to their great looks.


             SP32-650                                                                                                                                                          $150.00/Set


  
Intiminator: This is for the Suzuki SV650, the first patented inertia-activated front fork shock absorber designed to fit motorcycles and the only product on the market that detects if the wheel is trying to move or if the chassis is trying to move, resulting in a more stable chassis and a faster wheel response over bumps. This product will transform the front end of your motorcycle to give you the confidence and the ability to go faster. This is a "Race Only Design" Sold only By Spears Enterprises/Spears Racing (Fits 03/09)


              SP29-650-02                                                                                                                                                $275.00/Kit

    

Samco Sport Hose Kits: SamcoSport has been the world leader in Performance Silicone hose for over 10 years, supplying Formula One, NASCAR, and World Super Bike teams and our range of replacement hose kits, race parts and accessories is second to none. Samco Sport can offer you the best quality silicone hoses, for exceptional performance, and guaranteed reliability.


                                                                                                                                                                                                                                                         99/02 $142.00/Kit

                SP38-650                                                                                                                                                  03/09 $163.00/Kit

    

SpeedAngle: Focusing on a rider's performance instead of their motorcycles, the SpeedAngle GMOS JI100 multi-function lap timer and motion data logger enables real-time, scientific analysis a fun, quick and efficient way to improve bike handling skills. Displayed on the GMOS JI100's2-1/4 x 1-3/4 LCD screen is a unique and entertaining lean angle meter needle that swings left and right during cornering of up to 69 degrees, g-forces of +/- 1.5G when on the gas and braking, along with an array of lap-timing features.


               SP39-650                                                                                                                                                      $489.00/Kit

    

The HM Range is designed to simply be plug and play. Each HM Product is designed to be simple to install, so there is no need for costly fitment or dyno setup time. HM PLUS SS Features at a glance:• Plug and Play• No moving parts• Small LCD Display• No tuning needed • HM SS  Seamless Shift Technology• Programmable Kill Time* and Sensitivity• Programmable Shift Direction• Full 1 Years warranty and HM Technical Support

​     SP37-650K                                                                                                                                                              $450.00/ea

    

SV650 to GSXR Front end bearing kit: This is a custom sized top steering bearing that is needed to install a GSXR style front end onto you first gen sv650. The kit comes with 1(one) bearing and 1 (race) for the top, if you would like a new lower bearing we also stock them.



                SP35-650                                                                                                                                                         $50.00/Kit

    

Gauge/Tach Kit:1999-2002 SV650, Spears Racing has spent countless hours into refining this gauge assembly to work on your race or track day bike.Kit includes water temperature sensor insert, special resistor power wire and detailed instructions. Tachometer displays ambient temperature, engine temperature, dual programmable temp lights, selectable F/C display. Additional Features: clock (hour meter, stop watch, ride time, daily time), includes power connection for SV650, external/internal power both available, all parts included, one year warranty.

               SP36-650                                                                                                                                                          $225.00/Kit

    

EBC Series Kevlar friction plates and springs: have been a proven performer. The kevlar performs flawlessly under severe conditions and deliver smooth precise shifting. The kevlar friction material is bonded to 6061-T6 alloy CNC machined cores or tempered steel cores depending on the application. The plates are compatible with stock steel drive plates, springs and all oils.


                SP34-650                                                                                                                       Gen 1                        $125.00/Kit


                                                                                                                                                      Gen 2

  

Chain Hook:The "Chain Hook/Holder"© is an innovative designed made from 5052 Aluminum Alloy and is tumbled for a fine natural finish. The Hook/Holder© is to assist the racer or rider when it comes to removing their rear tire once the rim is off of the bike you have a place to hang your chain, this should fit all models of motorcycles.


             SP31-CH                                                                                                                                                           $20.00/Kit

  
Sigma Slipper Clutch Springs: Set of 6 clutch springs. These springs have been tested by Spears Racing and provide the necessary slippage and keeping the correct pre-load to provide your current horse power to be fully utilized. (Stock RWHP / 80 RWHP)


              SP20-650S                                                                                                                                                    $30.00/Set    





Sigma Slipper Clutch “33” Race: Manufactured from high quality hard anodized aluminum, Sigma Slipper Clutches supplied by Spears Racing. Feature a six-ramp automatic ball bearing lift mechanism. Plug n' play installation -no subsequent adjustment is required.  Complete assembly includes basket and it takes two extra plates to Handle more power. Uses standard clutch plates and SP20-650H Springs. Some protection against excessive over reving if the rider accidentally changes down too many gears going into a corner.


              SP20-650-33R                                                                                                                                             Call For Price

   

Sigma Slipper Clutch “33”: Manufactured from high quality hard anodized aluminum, Sigma Slipper Clutches supplied by Spears Racing. Feature a six-ramp automatic ball bearing lift mechanism. Plug n' play installation - no subsequent adjustment is required. Designed to use standard clutch plate packs and springs. Some protection against excessive over reving if the rider accidentally changes down too many gears going into a corner. **** Price Reflects Current Exchange/Price May Vary**** 


              SP20-650-33                                                                                                                                                $750.00/ea 

   

Sigma Slipper Clutch Springs: Set of 6 clutch springs. These springs have been tested by Spears Racing and provide the necessary slippage and keeping the correct pre-load to provide your current horse power to be fully utilized. (80 RWHP Plus)


              SP20-650H                                                                                                                                                   $30.00/Set    



41mm FCR Downdraft Carburetors:The advanced technology found in Keihin CR Racing Carburetors has been proven in over twenty years of roadracing with countless World Championship and National Championship Superbike victories. Along the way Keihin has established a respected reputation for quality, reliability and performance. Following in their tradition of high technology and performance, Keihin's latest carburetor design for racing is the FCR designed for downdraft engine design use, featuring a flatslide throttle operating on rollerbearings in a smoothbore venturi. 


           SP22-650                                                                                                                                                      $1390.00/Kit  

High Lift Roadracing Cams: Spears Racing camshafts are developed through countless hours in the dyno room, racetrack, and CNC cam grinding machine. Spears racing camshafts are machined from billet cam blanks, no welded up or reground stock units. Reliability and precision is amazing. Plus, there is no core. Spears Racing camshafts give the racer improved midrange and top end Horsepower, without sacrificing low end ridability. These cams do require the use of SP10-650 springs.


              SP17-650                                                                                                                                                    $1000.00/Set


Freeze Plugs Gen 2 : These are the OEM replacement freeze plugs that are not sold by Suzuki, these items are located inside of the cylinder heads. We have saved several racers in the Midwest and the East coast who Left engines filled with water/Water wetter products.


             SP16-650 Gen 2                                                                                                                                         $5.00 Ea.



Star Shifter:This is a quicker and easier way of shifting, perfect for track use and road riding for effortless downshifts into a corner. Missed shifts virtually disappear! And the speed at which the gears actually engage is dramatically improved. This kit has been race track proven by several AFM, CCS, WERA and WSMC racers.


              SP13-650                                                                                                                                                 $95.00/Ea


678cc / 2mm Overbore Piston Kit: These are the new forging that is as light as the stock OEM stock bore pistons. This is a 2mm over kit, includes pistons, coating, rings, lighter wrist pins, cir clips. The compression is 12.5 to 1.At the forefront of performance, piston manufacturing has been a result of continuous research and development of unique materials, piston designs and technologies. Utilizing State of the Art CNC machines for manufacturing, along with purpose-designed forgings, while being able to maintain exacting specifications on each and every piston - holding tolerances to millionths of an inch.


             SP12-650                                                                                                                                                  $500.00/Set


662cc / 1mm Overbore Piston Kit: These are  the new forging that is as light as the stock OEM stock bore pistons. This is a 1mm over kit; includes pistons, rings, lighter wrist pins, cir clips. The compression is 11.7 to 1. At the forefront of performance, piston manufacturing has been a result of continuous research and development of unique materials, piston designs and technologies. Utilizing State of the Art CNC machines for manufacturing, along with purpose-designed forgings, while being able to maintain exacting specifications on each and every piston - holding tolerances to millionths of an inch.


             SP11-650                                                                                                                                                  $500.00/Set


Valve Spring Kit: This is a set of 8 valve springs, these springs have been tested over hundreds of hours on the dyno, endurance and sprint races run by Spears Racing and other leading teams in the U.S. ( must use with the SP17-650 camshafts).


             SP10-650                                                                                                                                                $150.00/Set


Ceramic Bearing Transmission Kit:This is a set of 4 ceramic transmission bearings for the SV. It will allow your engine to have approximately 3 times less the normal coefficient of friction, and are 60% lighter than the steel OEM bearings. This style of bearing has been used in AMA factory bikes for the past several years.


             SP09-650S                                                                                                                                             $395.00/Set


Carrillo "H" Beam Rods: Fatigue is the major cause of connecting rod failure. At Carrillo Industries, they use proprietary steel, manufactured and forged to our own custom specifications. After experimenting with virtually every other reasonable material, we have found this chromium / nickel / vanadium / molybdenum FORGED alloy to be the best product to meet our stringent requirements for strength and durability.Our connecting rods are fully machined to guarantee the removal of all surface imperfections in the forging. After heat treatment, each connecting rod is 100% magnaflux inspected and hardness checked, then machined to final size. Each set of rods is balanced and thenshot peened to achieve the ultimate in strength and fatigue properties.


           SP07-650S                                                                                                                                               $540.00/Set


Engine Block Off Plugs : (2003 + SV650) These plates are machined from mild steel and are the direct bolt on replacement for your stock OEM Dowel pins. These solid plugs replace the current hollow dowel pins under the valve cover.


              SP06-650SV                                                                                                                                         $10.00/Set


Dyno Jet Carburetor Kit: Each Dynojet/Spears Jet Kit includes comprehensive instructions which show step-by-step installation and testing procedures to ensure a perfect setup every time. This kit has been tested and is used by several street and racers with in the USA. This is backed by free telephone support to Spears customers.


            SP05-650                                                                                                                                              $80.00/Kit                                                                                                                           

Lighten Starter Clutch Assembly: Spears Racing is now offering an even lighter starter clutch assembly for your Suzuki SV650, lighter than the current second generation starter clutch, it weighs 286grams it will allow your engine to spin up faster and get to the HP quicker. **Exchange Only**


             SP04-650SC Race                                                                                                                                 $95.00/Ea.


Lightened Ignition Flywheel/Rotor: Spears Racing offers a way to achieve better throttle response and more torque/horsepower by machining the stock SV650 ignition rotor to a special weight to achieve these kinds of results. (With Magnets) * Original rotor required.


          SP04-650SS                                                                                                                                         $125.00 Ea.                

            

Titanium Hardware:All of the Spears Titanium products are Grade 5, also known as Ti6Al4V, Ti-6Al-4V or Ti 6-4, is the most commonly used alloy. It has a chemical  composition of 6% aluminum, 4% vanadium, 0.25% (maximum) iron, 0.2% (maximum) oxygen, and the remainder titanium.It is significantly stronger than commercially pure titanium while having the same stiffness and thermal properties (excluding thermal conductivity, which is about  60% lower in Grade 5 Ti than in CP Ti). Among its many advantages, it is heat treatable. This grade is an excellent combination of strength,  corrosion resistance, weld and fabricability. A must for your lighten rotor assembly

             SP04-Titanium Bolts                                                                                                           $18.00/kit of 6 bolts

                                                                                                                                

Adjustable Cam Gears & Holders: This is a must for all tuners it is a known fact that "free" horsepower can be found just by slightly adjusting the timing position (degreeing) of your camshafts. This adjustment allows you to advance or retard cam timing for your specific application in order to get the most from the power characteristics.Sprockets are Stamped with the same numbers as OEM . 


            SP03-650                                                                                                                                            $335.00/Set

​​Spears High Flow Pods: Spears Racing has done several hours or dyno time on these custom air filters. These filters will increase your air flow, and more air = more fuel = more H.P. These filters will bolt onto your stock Suzuki carburetors.

             

               SP02-650                                                                                                                                                               $50.00 /Set


High Comp Kit 645cc : This is the new forging that is lighter than stock OEM Pistons. Drop in high compression kit includes pistons, rings, lighter wrist pins, cir clips and custom base gaskets to establish the correct deck height. The compression is 12.9 to 1. At the forefront of performance, piston manufacturing has been a result of continuous research and development of unique materials, piston designs and technologies. Utilizing State of the Art CNC machines for manufacturing, along with purpose-designed forgings, while being able to maintain exacting specifications on each and every piston - holding tolerances to millionths of an inch.


            ​SP01-650                                                                                                                                           $520.00/Set


Suzuki Sv650 :


Dyno Jet PowerCommander:Each Power commander unit includes comprehensive instructions which show step-by-step installation and testing procedures to ensure a perfect setup every time. This kit has been tested and is used by several street and roadracers around the world. Spears Racing was one of the first 3 Powercommander centers in the world. This is backed by free telephone support to Spears customers.



             SP05-650                                                                                                                                                          $350.00/Ea


Rev2 Throttle: New ultra compact housing with snap-together elbows make it easy to install and change reels, Sleek new design requires less handlebar space for lever clearance and throttle position use smaller reels for slower throttle rate and larger reels for faster throttle rate Included cam reel provides progressive throttle response preferred by some riders. Unique reel design allows fast reel changes Cable boot keeps dirt and dust out for reliable and smooth operation Billet aluminum in-line cable adjusters for easy installation and adjustment
​                                                                  
          SP19-650 R-2                                                                                                                                              $164.99/Ea.
    




                                                                                Description


Hour Meter: Surface-mounted inductive meters provide what today's powersports user needs and expects from hour meters. Hour meters have become the most cost effective method of performing service. Knowing what to service and when, is the key to a successful preventative maintenance program for your motorcycle.The hour meter shows total hours accumulated.


                 SP33                                                                                                                                                                 $29.95/Ea  

                                                                                                                                                                                           

Andreani Hydraulic Cartridge Kit:Cartridge fork kit has been developed by Andreani Group and equipped with a sophisticated hydraulic system which guarantees exceptional performance in cornering and braking. These 20mm diameter pistons with oil passages increase adjustability in compression and rebound damping. Spring preload is adjustable by turning the pre-load cap. The cartridge kit comes complete with the correct springs that are established prior to purchase based on the weight and the rider’s style/type of track. Andreani Cartridges are Diamond Carbon Coated (DLC) is the ultimate performance coating. 


               SP30-650                                                                                                                                                       $599.00/Kit


Intiminator: This is for the Suzuki SV650, the first patented inertia-activated front fork shock absorber designed to fit motorcycles and the only product on the market that detects if the wheel is trying to move or if the chassis is trying to move, resulting in a more stable chassis and a faster wheel response over bumps. This product will transform the front end of your motorcycle to give you the confidence and the ability to go faster. This is a "Race Only Design" Sold only By Spears Enterprises/Spears Racing (Fits 99/02)


             SP29-650-01                                                                                                                                                $275.00/Kit

    

EBC Extreme Performance Brake Pads:This is a complete set of EBC brake pads, which are direct bolt on to your stock calipers. These pads will work superior to any stock brake pads.The latest in sintered metal brake pad fusion technology. Has the highest friction rating possible - 0.6 - for strong,fade-free stopping power. Pad blend includes molybdenum metal and tungsten additives to enhance friction performance for the life of the pad. No lead, iron or steel additives, no more rotor outline etching or rotor stiction. Super-fast bed-in, full friction after 10 to 15 race stop uses. Great heat cycle ability, pads cool after the race and perform just as strong the next race.

       

               SP27-650                                                                                                                                                   $150.00/Set

Superbike Brake Lines: This kit has a Dash 3 inner Features 16 braided lines of steel around the inner teflon, and all lines are coated with PVC protective coating. Also prevents scratches on the bike and keep fluid from being affected by humidity. Threads directly into calipers without use of banjo bolts, allowing for smoother and more effective flow of brake fluid. Provides stronger lever feel and quicker stopping power because it creates better pressure to the caliper.*Recommended for race use only.* Fits all SV650s and GSXR front-end conversions


              SP28-650SB                                                                                                                                                 $130.00/Kit

    


Captive Wheel Spacer Kit: For Suzuki SV650 stock rims. These spacers kits are machined from 60/61 aluminum material. This innovative design is machined according to Spears Racing specifications and is race proven. The kit weighs 7oz. less than stock, and lessens your unsprung/rotating weight. Installation of his kit will require the removal of the stock bearings. Front wheel: $85.00 - This kit consists of two bearings, two captive spacers, one center spacer. Rear wheel: $125.00 - This kit consists of two bearings, two outer captive spacers, one inner cush drive spacer, and one center spacer.


             SP26-650 03/07                                                                                                                                           $210.00/Kit  

Wheel Conversion 03/07 SV Only:This kit will enable you to properly install any late model (06/07) GSXR 600 or GSXR 750 rear wheel. You do not even need to change bearings. This means you can run any (2006/2007) GSXR wheel with street tires, track day tires, DOT race tires or slick race tires with just asingle kit. The captivated spacers are manufactured from aerospace 6061 T6 aluminum alloy.(will need to be done on your cores)


             SP26-GSXR650                                                                                                                                             $225.00/Kit

    

Captive Wheel Spacer Kit: For Suzuki SV650 stock rims. These spacers kits are machined from 60/61 aluminum material. This innovative design is machined according to Spears Racing specifications and is race proven. The kit weighs 7oz. less than stock, and lessens your unsprung/rotating weight. Installation of his kit will require the removal of the stock bearings. Front wheel: $85.00 - This kit consists of two bearings, two captive spacers, one center spacer. Rear wheel: $125.00 - This kit consists of two bearings, two outer captive spacers, one inner cush drive spacer, and one center spacer.


            SP26-650 99/02                                                                                                                                             $210.00/Kit 

Manual Cam Chain Tensioners: manual cam chain tensioners are designed to replace the automatic and hydraulic tensioners on high performance engines. The automatic adjusters can back out when the throttle is closed suddenly at high rpm. This allows the cams to go momentarely out of time, and can result in bent valves and/or serious engine damage. Hydraulic tensioners have a tendency to put too much tension on the chain guide under high rpm/high oil pressure conditions,resulting in premature wear.


            SP25-650                                                                                                                                                        $89.00/Ea.​​

Cylinder Head Stud Kits: This is a chrome moly Cylinder Head Stud Kit for a SV650. It replaces the stock Suzuki bolts and allows you to increase the torque on the Studs to handle the increase of cylinder compression and continue to race without bolt stretch. This kit consists of studs and nuts.


            SP24-650                                                                                                                                                      $150.00/Set

 

  

Straight Clutch Cable: This is a custom Clutch cable developed by Spears Racing for a "stock street bike" or a track day/race bike, this cable will work with the stock handle bars or "Clip Ons" the end that goes into your clutch perch is straight and no longer has the metal bend, this will allow the cable to last longer and have a better pull. (99/09)


           SP23-650                                                                                                                                                       $35.00/Ea. 

   

 

5th-Turn Throttle: Tube and grip that will fit all 2003 to 2009 SV650 naked and SV650s models. This is a must for anyone that races and does track days and any street riders that are tired of having to re-grip to obtain full throttle.


              SP19-650                                                                                                                                                      $30.00/Ea.     




Custom base gaskets/Spacers Plates: .007 to .063. All base gaskets are made from spring steel, copper or aluminum and allow you to change your compression ratio without machining. This is a must for all racers and engine builders.


              SP18-650                                                                                                                                                     $24.00/Ea.     




High Lift Roadracing Cams Hard Weld: Spears Racing camshafts are developed through countless hours in the dyno room, racetrack, and CNC cam grinding machine. Spears racing camshafts are welded up and reground with the reliability and precision you come to expect. Spears Racing camshafts give the racer improved midrange and top end Horsepower, without sacrificing low end ridability. These cams do require the use of SP10-650 springs. ***Customer Cores Needed***


             SP17-650HW                                                                                                                                                $795.00/Set


Freeze Plugs Gen 1: These are the OEM replacement freeze plugs that are not sold by Suzuki, these items are located inside of the cylinder heads. We have saved several racers in the Midwest and the East coast who Left engines filled with water/Water wetter products.


             SP16-650 Gen1                                                                                                                                          $5.00 Ea.



High Compression Stock Bore Head Gaskets: Spears Racing has developed a stock bore(81mm) high compression head gasket, these gaskets will give you more compression and allow the bike to come off of the corners harder. Spears Racing has seen 1 to 3 Ft-Lbs of torque and 2 to 4 RWHP when using these gaskets. These are spring steel gaskets.


            SP15-650HC                                                                                                                                              $49.00/Ea.                                                                                                           


Custom Head Gaskets: Spears Racing has stock bore, 1mm, 2mm & 3mm overbore head gaskets in different thickness to allow you the ability to set your own Squish height. These are Suzuki style spring steel gaskets.


              SP15-650                                                                                                                                                 $49.00/Ea.


Steel Oil Pump Gear: This is a fully machined oil pump drive gear. This is a direct bolt on replacement for the hard plastic/nylon gear that you will find on your SV650. This gear will not fail or come apart under strenuous racing conditions.


             SP14-650                                                                                                                                                  $75.00/Ea.


Carrillo "A" Beam Rods: The new Pro-A is designed by Carrillo engineers, manufactured at our facility from the same parent material that has been proven in the better-known "H-Beam". With the implementation of modern machining methods as well as a more basic design, the Pro-A requires less machine time and less detail effort. Furthermore, these efficiencies have allowed us to offer this product at a significantly lower price than our widely accepted "H-Beam". All details of design,dimensional integrity and balance are parallel with those of the well-known H-Beam.


           SP08-650S                                                                                                                                             $475.00/Set