Titanium has been around since 1790 and gets it name from the Greek God “Titan”, the God of enormous strength. Not until 1910, 120 years since the discovery of the ore in England, was there a process developed that allowed the metal to be extracted from the ore.
The individual responsible for this process was a gentleman by the name of M.A. Hunter. The basic process created by Mr. Hunter involved mixing TiO2 with coke and chlorine. When heat was applied to the TiO2 the resulting product was TiCl4. Then sodium was used to reduce the TiCl4 . At this point in time, the titanium produced by this method was used as an alloying agent in the production of steel.
For decades titanium was considered an “aerospace metal” and was used exclusively in this application. As time went on, the corrosion properties of the metal were explored in non-aerospace applications, specifically as a tubing product used in heat exchangers for power generation. This application proved to be extremely successful and the “industrial” market was created.
All of the Spears Titanium products are Grade 5, also known as Ti6Al4V, Ti-6Al-4V or Ti 6-4, is the most commonly used alloy. It has a chemical composition of 6% aluminum, 4% vanadium, 0.25% (maximum) iron, 0.2% (maximum) oxygen, and the remainder titanium.It is significantly stronger than commercially pure titanium while having the same stiffness and thermal properties (excluding thermal conductivity, which is about 60% lower in Grade 5 Ti than in CP Ti). Among its many advantages, it is heat treatable. This grade is an excellent combination of strength, corrosion resistance, weld and fabricability.
*Titanium is as strong as steel, but 45% lighter
*Titanium is 30% more elastic than steel
*Titanium is resistant to salt water, perspiration and acids.
*Titanium has a "low magnetic signature" reducing visibility to metal detectors
*Titanium does not become magnetized
*Titanium can only be worked with extremely hard tools
*Titanium has an extremely high melting point of 1800 degrees Celsius
*Titanium is believed to be the earth's crust's 9th most common element (about 0.6%)
*Titanium does not occur in nature as a metal
8 ea. Brake Rotor Bolts
6 ea. Drive Sprockets Nuts
6 ea. Drive Sprocket Studs
2 ea. Race Spec'd Drilled Caliper mounting Bolts
Yamaha R-3- Ninja250/300cc .
Special Pricing $189.99/ Kit
Yamaha R-3 Kawasaki Ex250/300
Special Pricing $79.00/ Kit
Fitment is for Sprocket nuts, if your motorcycle has a Studded Sprocket and it is 10mm you will need to remove and confirm the stock length.
As the leader in Lightweight motorcycles, Spears Racing has designed this page to allow you, the end user the ease of finding the correct "Titanium Kit" for your street, track day/racing efforts. Just remember that all of these products will lesson your unsprung weight and rotating mass and will enhance your riding experiences. Click on your Product and you will see the page "Lighter is Better"
6 ea. Sprocket Studs M10 x 1.25x 45mm
6 ea. Drive Sprockets Nuts M10 x1.25