MWR Full Race airfilter: The filter is developed on the track , NOT on a dyno but in real life , bikes with Dataloggers for the ultimate performance due to new materials and design. Unlike any other air filters all inlets will get the same quantity of air , regardless the speed of the motorcycle , wind directions or the turbulence of the fairing . No different fuel-mappings between internal & external or front & rear cylinders are needed , this will be achieved by tuning each cylinder separate . It makes the bike stronger but smoother.
Caution : The Full Race airfilter protects for 100% but for a short period of time , check after each race weekend your filter.Make sure you start each race weekend with a well oiled filter .
SP02-320 MWR $79.99/ea
The HM Range is designed to simply be plug and play. Each HM Product is designed to be simple to install, so there is no need for costly fitment or dyno setup time. HM PLUS SS Features at a glance:• Plug and Play• No moving parts• Small LCD Display• No tuning needed • HM SS Seamless Shift Technology• Programmable Kill Time* and Sensitivity• Programmable Shift Direction• Full 1 Years warranty and HM Technical Support
Ignition Key Switch Eliminator : This Key Switch eliminator lets you remove your stock ignition switch saving weight where it counts - up high! Removing your stock ignition will also free up valuable space for steering dampers and lap timers. The things you need go in the space you save. The best thing about our Key Switch Eliminator is the ability to simply "Plug and Play". It installs in seconds and requires no modifications to your stock harness - no need to cut any wires! This means easy re - installation of stock components down the road. ***Race Use Only***
SP320-Switch Eliminator $52.24/ea
Vortex Clip-Ons: These are an economical replacement handlebar with amazing strength. They are machined from solid billet with a removable handlebar. In the event of a crash, you simply replace the handlebar tube instead of the entire Clip-on. Vortex handlebars come in 0 and 7 degree angles. Kit includes both collars, 2 handlebar tubes with plastic ends and high tensile strength fastners. Note: Vortex Bar End BE118K will also work with Vortex Clip-on tubes.(Black or Natural color)
SP32-320 Vortex $140.00/set
EBC Full Floating Front Brake Rotor:These discs are British made using German mill rolled precision stainless steel rotor blades with weight reducing contoured profile which are mounted onto lightweight alloy center hubs using the EBC patented SD square drive button technology. Square drive buttons resist loosening and prevent vibration common with low cost circular rivets or buttons. Rotor blades are precision ground for fast and perfect pad bed-in. All EBC discs are 100% inspected for accuracy and runout. New pads must be installed, please choose from our wide selection of organic or sintered pads elsewhere on this site.
SP27-320 EBC Rotor $195.00 EBC Race Pads EPFA $62.27/ea GPFAX $75.00/ea
***** EBC Superbike Brake Kits HERE ***** $295.00
Spears Racing Aluminum Swingarm Spools:These spools are CNC machined from Aluminum. Rust-proof 6x1.0mm mounting hardware are included. The grooves on these spools at the point of swingarm stand contact are deep so the engagement is solid, which makes it impossible for your bike to fall off the stand under normal use.
SPSwingarm Aluminum Spools $16.99set
Spears Racing Foot peg Risers:These risers are CNC machined from extremely strong and light weight aerospace grade 6061-T6 aluminum. They are designed to stand up to the rigors of racing and crashing as well as possible. They are laser engraved with the Spears Racing logo and include all of the mounting hardware. This kit includes a longer steel shift rod that will allow you to use standard shift pattern only. An optional shorter rod is available for use with a quickshifter and also works for standard
SP320-Footpeg Risers Plates $49.00/Kit
Spears Racing Magnetic motorcycle drain bolts : Pre-Drilled for Safety wire. Lightweight aluminum construction in an anodized Signature "Spears"Orange. The drain bolt has an Embedded Magnet which holds metal engine shavings to keep your oil clean. Includes Aluminum crush washer for Proper Installation.
Will Fit the following Bikes M12X1.5: KAWASAKI NINJA 250/300, YAMAHA R3
Öhlins NIX 22 Cartridge Kit is based on experienced learned through decades of testing and racing in high tier championships. The kit delivers loads of performance with stable damping characteristics while ensuring great comfort, contributing to rider confidence. The NIX 22 is developed to increase performance for light weight sport bikes and street bikes, the cartridge kit gives the bike stable damping characteristics while ensuring great comfort which contributes to rider confidence.
The Kit has the Öhlins proven “NIX” design which features compression damping in the left leg and rebound damping in the right leg. This allows for a more precise function and stability. Adjustments are made at the top together with the spring preload and the cartridge system fits bolt-on and is easy to install in standard front forks.*External Compression & rebound adjustment*External preload adjustment
*22 mm piston diameter*Range of springs available ***ALL KITS include SPRINGS FOR RIDERS WEIGHT***
Öhlins FKS-203 $699.00/kit
Spears Racing Billet Fuel Cap:Quick Release Fuel Gas Caps are for the (2015 +) YZF-R3 These caps are machines to the tolerances set by Spears Racing and made from 6061 Aluminum,each with there own sealing "O" ring and mounting hardware. Three different colors (Finished with Anodize Coating) and have the Spears Racing Logo Laser Etched.
SP320-Fuel Caps BLUE BLACK ALUMINUM (Natural) $89.95/ea
Armour Bodies: bodywork has award-winning fit and finish that took the industry by storm when Armour Bodies scored among the leaders in every single category in the Roadracing World bodywork comparison. This bodywork was rated to have exceptional fit, the highest durability and was #1 in surface finish and flexibility.
Armour Bodies is top quality bodywork that is made with unique resin derived from the Kayak racing industry, giving it the ability to withstand the rigors of the racetrack. We use only large sheets of fiberglass with minimal use of mill fiber - giving the part the best possible structural integrity. Each part is then hand sanded, individually fit together and finished in a high quality primer that is ready for paint after a light scuff.
SP320-Armour Body Work $699.99/set
Spears Racing High Compression Head Gasket: This gasket is custom made to Spears Racing Specifications it will increase your stock Compression to allow better off the corner power (Per FIM Supersport300 Rules) and increase your RWHP.The thickness is made thinner than original gasket to get more powerful racing.This cylinder head gasket is for racing purpose only.
Robby Moto Quick Action Throttles & Kill Switches:Robby Moto Engineering are a leading Race Parts Manufacturer and their quality is undisputed. Their excellent quick action throttles come complete with 1 cam and model specific cables to ensure a perfect fit. These really are a trick bit of kit and are as used by top teams.
Kill Switches: are designed to take the place of the standard right hand switch when being replaced with a Quick Action Throttle or stand alone(OEM).The switch comes to you as a "Ignition by~pass" no more need to purchase an additional key switch eliminator this is a Plug n Play install.(Race Use Only)
SP19-320RM Switch $79.95 Complete Kit:$249.99
EBCFA663HH Brake Pads: EBC flagship sintered streetsport pad that delivers highest braking power, stability and long life. Ultra high HH rated friction TÜV tested and ECE R 90 brake safety approved, there are few pads on the market to meet or beat the performance of Double-H™ pads. Made in the EBC state-of-the-art sintering plant in Ohio, USA, these pads stop fast - wet or dry - and last for thousands of miles.
SP27-320 EBC $34.99/Kit
Spears Racing Folding & Adjustable & Expandable Levers: CNC Machined Billet (6061 Aluminum ) Motorcycle Brake and Clutch Levers. These Levers are Foldable, Expandable, Adjustable, Replaceable and Extremely Affordable. The levers can be 90 degrees folded up, feature minimizes the possibility of breaking a lever in the event of a crash. Extendable lever tip can go from full length to short or anywhere in between.Fully adjustable(6 positions),Fully extendable(2 or 4 fingers),Available in Black,Red,and Blue.
SP320-Lever Set $79.95/set
Vesrah VD289RJL Front Pads: Vesrah has gained extensive experience and technical knowledge for brake manufacturing since 1950. Their sintered metal pads are longer lasting and produce increased braking performance with one touch finger control. RJL high performance racing brake pads give you powerful braking at the track and are used by many professional road race teams.
Ceramic Wheel Brearings: The ceramic balls in these hybrid bearings are over 60% lighter than their steel counterparts resulting in faster acceleration and reduced inertial loads.Low Friction-Less Vibration the coefficient of friction for the ceramic balls is an average of 3x's lower than steel. When you combine this with the high tolerances for roundness you get a bearing that dramatically lowers vibration levels and produces more horsepower.
SP26-320 Ceramic Frt.only $80.00/set Rear Rim only $90.00/set (No sprocket carrier) Frt&Rear
High Lift Roadracing Cams Hard Weld: Spears Racing camshafts are developed through countless hours in the dyno room, racetrack, and CNC cam grinding machine. Spears racing camshafts are welded up and reground with the reliability and precision you come to expect. Spears Racing camshafts give the racer improved midrange and top end Horsepower, without sacrificing low end rideability.
***CORES NO LONGER NEEDED***
SP17-320 $650.00 set.
Ceramic Bearing Transmission Kit: This is a set of 2 ceramic transmission bearings for the Yamaha R-3. It will allow your engine to have approximately 3 times less the normal coefficient of friction, and are 60% lighter than the steel OEM bearings. This style of bearing has been used in AMA factory bikes for the past several years.
Spears Racing Rear Shock: This is a shock that is built in the USA for the 2015 Yamaha R-3. Double Adjustable compression and rebound and adjustable Ride Height provides the performance of the Piggyback design with the flexibility of universal fitment. This Shocks come with universal mounting hardware to ensure you not only get great performance, but the look and functionality that ensure satisfaction. Weight of shock is 2 LBS less than OEM.
SP320-Rear Shock $899.00 ea
Andreani Hydraulic Cartridge Kit:Cartridge fork kit has been developed by Andreani Group and equipped with a sophisticated hydraulic system which guarantees exceptional performance in cornering and braking. These 20mm diameter pistons with oil passages increase adjustability in compression and rebound damping. Spring preload is adjustable by turning the pre-load cap. The cartridge kit comes complete with the correct springs that are established prior to purchase based on the weight and the rider’s style/type of track. Andreani Cartridges are Diamond Carbon Coated (DLC) is the ultimate performance coating.
Superbike Brake Lines: This kit has a Dash 3 inner Features 16 braided lines of steel around the inner teflon, and all lines are coated with PVC protective coating. Also prevents scratches on the bike and keep fluid from being affected by humidity. Threads directly into calipers without use of banjo bolts, allowing for smoother and more effective flow of brake fluid. Provides stronger lever feel and quicker stopping power because it creates better pressure to the caliper.Used in FIM World Supersport 300
Sato Racing Rear Sets:The shift and brake pedals utilize double stainless bearings for smooth, precise pedal movement. Knurled footpegs provide excellent grip even in wet conditions. These Rear Sets are compatible with the stock brake light switch. The shift pedal has multiple adjustment points for fine-tuning the shifter feel. To change to reverse (GP) shift pattern, rotate the change arm 180 degrees. SP-Sato Rear Sets $500.00/Set.
Dyno Jet Power commander: PCV is less than half of the size of PCIII,USB powered from computer, 2 position map switching function built in (map switch not included),Gear/Speed input (allows for map adjustment based on gear and speed), Unit has a -100/+250% fuel change range (up from -100/+100%). This allows more adjustment range,10 throttle position columns (up from 9 on PCIIIusb).This is backed by free telephone support to Spears customers. ***ALL PCV's Come with a Custom Spears Fuel and Ignition Map***
SP05-320 PCV $369.00 ea.
415 Rear Sprocket: This is a replacement rear sprocket for the Yamaha YZF-R3. These rear sprocket are machined from the highest grade aluminum aerospace quality 7075-T651 (9.64 oz./274g) These sprockets are being used in the FIM World Supersport300 Series ***Please Specify number of teeth when ordering online 54 to 57 *** Made in the USA ***Lightest Rear 415 Sprocket*** SP04-320 Sprocket $70.00 ea.
415 Countershaft Sprocket : This is a replacement counter shaft sprocket for the Yamaha YZF-R3 Drilled to be the lightest sprocket (sprocket weights 4.6oz (18Tooth) Used in the FIM World Supersport300 Series Made in the USA
SP04-320 CS $49.95 ea.
415 Drive chain : This is a replacement drive chain, the DID415ERZ chain has a tensile strength of 4,540 (2.lbs.25 oz or 1021 grams ) Each is high-performance, lightweight, low-friction chain designed exclusively for racing provides the highest wear resistance, tensile strength and impact resistance distinctive gold-plated finish.
SP04-320ERZ $99.95 ea.
415 Drive chain Kits: This is for the Yamaha YZF R-3 this kit will reduce the rotating mass of your drive assembly by over 2.5 lbs.The rear sprocket is machined from the highest grade aluminum aerospace quality 7075-T651 (9.6 oz./274g), the DID415ERZ chain has a tensile strength of 4,540 (1lb.15.7oz) and the counter shaft sprocket (5.1oz). This kit is Standard with a 18 tooth front sprocket and a 55 tooth rear sprocket. (Finial Drive Ratio 3.056) Stock(OEM Finial Drive 3.071 ) Made in The USA Used in FIM World Supersport 300 Series
BMC Race Filter: BMC has produced a race version for the most important bike models. These filters have the same shape as the standard version but with a different filtering body designed to take in more air than other air intake systems, but without compromising its filtering properties. BMC RACE filters are for people who are not satisfied with the standard performance of the bike and want to improve the engine by upgrading other bike parts. With this filter they can find the best balance for a bike aiming for the top. BMC RACE filters are identified by an orange line inside the filtering body.
Spears Racing Titanium 10 m x1.25 Nuts: A must for any racer or those who simply wish to replace rusty originals! A replica of manufacturers original design but in superior quality material. Our Titanium 6AL-4V (grade 5) bolts are highly corrosion resistant, extremely light (40% weight saving!) and with rolled threads offers excellent strength and quality.
SPTitanium Nuts Sold Ea/6 Per Bike $5.00/ea
SP-320 Engine Case Cover This 2-piece kit is designed to keep your bike safe in the event of a crash as well as to give your bike a custom look that will make you stand out in the crowd. The aluminum base is 100% CNC machined from 6061 Aluminum billet to give you both great looks and exceptional strength, the kit comes with mounting hardware .
SP320-Engine case covers $95.00/set
Spears Racing Engine Crankcase Cover Set for 14-17 YAMAHA YZF R25 R3 MT-03
Revolutionary new tough, high-impact composite material made from 60% Long Glass Fibered Nylon
Bolt on product, allowing fast and easy removal and/or replacement
Designed with aesthetics in mind, and priced to be competitive with the existing products on the market
Designed to be installed over your existing OEM engine cover. Not a replacement cover.
Set includes Stator/Alternator cover, Clutch cover, Water pump Cover (three pieces total) and mounting Hardware.
Easy installation - covers fit over existing aluminium engine case end with simple 3 or 4-point screw fixing (high quality replacement steel bolts/washers, new WP Crush washer and fitting instructions included).
SP-320 Case Covers Install Manuals $189.99/kit
SP320 Mirror Covers:Machined From 6061 Billet Aluminum these plates are designed to replace the mirrors from the upper fairing, they can be used on street bikes(with different mirror placement or on all race bikes once you install your new race bodywork. Mounting Hardware included.
SP320-Mirror cover $19.00/set
Yamaha YZFR3:SKF’s extensive experience in the design and material development of seals for suspension systems, SKF has developed a new self-lubricating compound. The design and performance characteristics of the seals made from this compound enable them to keep oil in and contaminants out of the fork, while virtually eliminating stiction and improving performance by reducing friction. Note: Each SKF seal kit includes 1 oil seal + 1 dust seal. To rebuild both forks you need to order 2 seal kits.
SKF41mm R3 $33.99/ea.
Brake Caliper Bolts: Our 'Race Spec' bolts are machined pre-drilled (1.6mm) on all flats to allow for ease of lock wiring - by reducing the socket size, scooping out the head and pre drilling our bolts they are 45% lighter than steel equivalents Produced in Grade 5, 6AL-4V Titanium providing strength and corrosion resistance. (Set of (2) Two)
SP320 caliper bolts $30.00/Set.
Spears Racing 90° lightweight valve stems: We understand the quality and performance that motorcycle owners demand. They also understand that quality should be affordable. Not just for professional riders and mechanics, but for the everyday rider/mechanic as well.
Provides easy access to check tire pressure.Sold in a 2-pack (front and rear included).Note: All valve stems are 11.3 mm (fit O.E. wheels)
SP-90° valve stems $22.00/set
Spears Racing Titanium Kits R-3: This is a kit of the above 4 items (22 Pieces), this is a must for any racer or those who simply wish to replace rusty originals! A replica of manufacturers original design but in superior quality material. Our Titanium 6AL-4V (grade 5) bolts are highly corrosion resistant, extremely light (40% weight saving!) and with rolled threads offers excellent strength and quality.
SPTitanium Kit R-3 $189.99/Kit
Woodcraft Two-Piece Split Clip-ons: Aftermarket clip-ons and risers have major interference issues on the new R3, so Woodcraft designed a special set that bolts right on the R3 - street or track.These custom parts help improve front end feel and rider control. They drop the bars nearly 3" (see comparison photo) over the OEM parts and feature a sporty yet comfortable 5 degree down angle. Plus, replacement bars are inexpensive and available everywhere. With Woodcraft's trademark split clamp design, installation and service is a breeze.
Spears Racing Titanium Disc Rotor bolts: A must for any racer or those who simply wish to replace rusty originals! A replica of manufacturers original design but in superior quality material. Our Titanium 6AL-4V (grade 5) bolts are highly corrosion resistant, extremely light (40% weight saving!) and with rolled threads offers excellent strength and quality.Set of (8) boltd
SP320-Rotor Bolts $90.00/set
Spears Racing 14mm and 16mm Castle Nuts: To secure your front and rear stock axles,these M14/16mm x 1.5 Slotted Hexagon Castle Nut Class 8 Nuts are $6.00 ea or set for $12.00
14mm Nut 16mm Nut Both Nuts
Spears Racing Billet Pre-load Fork Caps:Adjustable Fork pre-load Caps are for the (2015 +) YZF-R3 These caps are machines to the tolerances set by Spears Racing and made from 6061 Aluminum comes with sealing "O" Rings finished with Hard Anodize Coating
**Fine tune the front suspension of your motorcycle for the race track or back road.
** Initial Preload Adjustment begins at 13 mm past stock
** Maximum Pre-load Adjustment 31.50mm
**Easy installation - no fork removal and fork oil draining involved
SP320-Pre-load caps BLACK ALUMINUM (Natural) $69.95/set
Yamaha R-3 GPR V4 Steering Stabilizer:Specifically made for sport/roadracers in mind,WERA,CCS,CMRA,and many more organazations. We've taken our proven fluid control technology and squeezed, trimmed, and lightened this model up to be exactly what the racers want. Smaller, lighter, faster.A large dial with a definite "no-slip" grip that locks into place with a positive "click" at 20 settings. Available now in Black / Red and multiple color combinations. Developed extensively in the World Superbike paddock and the AMA Roadracing paddock. Shorter fluid ports, new valving, quicker reacting to high speeds. ***Specify Color when ordering***
SP320-GPR Stabilizer $472.00/set
Captured Wheel Spacer Kit:All kits include new bearing seals which capture the outer spacers and keep them from falling out during wheel changes.
– Complete kit for front and rear wheels – This kit replaces the heavy steel inner spacers with lightweight aluminum spacers, and replaces the outer steel spacers with lightweight aluminum captive spacers $150.00/Complete
– Complete Kit for rear wheel only – This kit replaces the heavy steel inner spacer with a lightweight aluminum spacer, and replaces the outer steel spacers with lightweight aluminum captive spacers $100.00/Rear
– Complete Kit for front wheel only – This kit replaces the heavy steel inner spacer with a lightweight aluminum spacer, and replaces the outer steel spacers with lightweight aluminum captive space $50.00/Front
These spacers kits are machined from 6061 aluminum and anodized. Anodizing is an electrochemical process that converts the metal surface into a decorative, durable, corrosion-resistant, anodic oxide finish.. This innovative design replaces the heavy OEM steel spacers and these lightweight captive spacers stay in the wheel when you remove the wheel from the bike, making it much easier and faster to take the wheel on and off for tire or sprocket changes. The front and rear spacer kit combined weighs 11.25 oz. less than the OEM steel front and rear spacers.
Installation of the complete kits require the removal of at least one wheel bearing per wheel to change the inner spacer, so in order to maximize the performance you get for your dollar, we recommend replacing the OEM steel wheel bearings with light weight, low friction ceramic wheel bearings at the time of installation.
Intiminator: This is for the Yamaha YZFR-3, the first patented inertia-activated front fork shock absorber designed to fit motorcycles and the only product on the market that detects if the wheel is trying to move or if the chassis is trying to move, resulting in a more stable chassis and a faster wheel response over bumps. This product will transform the front end of your motorcycle to give you the confidence and the ability to go faster.This is a "Race Only Design" Sold only By Spears Enterprises/Spears Racing (Fits 2015/2016)
Adjustable Rearset Assembly Complete W/Shift & Brake Pedal, Black 2015 + : The full rearset kit consists of the rearset plates, footpegs, brake and shift pedals with eccentric toe pegs and all of the needed hardware to install the kit properly. These kits are made from tough, aircraft grade 6061 T6 Aluminum and anodized with a black finish. This kit has eccentric pegs that have 12 positions of adjustment. Woodcraft tested these kits to get them in the perfect place for aggressive street or track riding. There are optional folding eccentric toe pieces that will help protect the toe pieces and levers in the event of a crash by allowing them to fold out of the way.These rearsets are much stronger than OEM brackets.(OEM rearsets are made from cast aluminum and break easily) (Choose GP or Standard shift when order SP-CFM-320 $389.49/Set.
Emission Block off plates:Spears Racing Smog Block Off Plates for Yamaha R-3 model. Spears Racing Smog Block Off Plates are designed to seal off the ports on the valve cover used by the air injection system (a.k.a smog pumps or AIS). The air induction system (AIS) burns unburned exhaust gases by injecting fresh air (secondary air) into the exhaust port, reducing the emission of hydrocarbons. Once these are capped off the air injection system can be safely removed. These Smog Block Off Plates are made from CNC'ed billet aluminum and feature the Spears Racing logo. (Stainless Steel Bolts, rubber plugs are included)
SP06-320 $22.00 ea.
Rev2 Throttle:New ultra compact housing with snap-together elbows make it easy to install and change reels, Sleek new design requires less handlebar space for lever clearance and throttle position use smaller reels for slower throttle rate and larger reels for faster throttle rate Included cam reel provides progressive throttle response preferred by some riders. Unique reel design allows fast reel changes Cable boot keeps dirt and dust out for reliable and smooth operation Billet aluminum in-line cable adjusters for easy installation and adjustment SP19-320
M-4 Yamaha R3 Full Race/Std with Polished Canister: M4 has gone to great lengths to make sure the pipe for the R3 is better than the competition. We are confident this system will give you the most power possible from any aftermarket pipes available. Comes with a "race bracket" or you can still use the passenger foot peg assembly. Produces 10% more horsepower than the stock system and weighs 10.5 lbs less. Race Use only In California
SP320- Std with Polished Canister $565.00/ea Carbon fiber Canister Titanium Canister Street Slayer Carbon Slip on
$628.00 $628.00 $399.60
Spears Racing Titanium Sprocket Stud Kits: M10x1.25x45m This is a kit of 6 sprocket carrier studs, this is a must for any racer or those who simply wish to replace rusty originals! A replica of manufacturers original design but in superior quality material. Our Titanium 6AL-4V (grade 5) bolts are highly corrosion resistant, extremely light (40% weight saving!) and with rolled threads offers excellent strength and quality.Machined 5mm hex head to install ea stud.
SPTitanium Kit R-3 $79.99/Kit
Aluminum Banjo Bolt/Steel Bleed Screw Bleeder Assembly:The ultimate solution for "Hard to bleed brake systems". These banjo bolts feature a bleeder nipple which allows you to bleed the air out of the brake system at the highest point or just before the brake fluid goes into the caliper. Makes bleeding your brake system easier and quicker. Kit include:1pc x Brake Caliper Bleed Screw/Nipple (w/Banjo bolt)
2pcs x Sealing Washer.
SPBleeder-Assembly $15.00 ea
Sigma Slipper Clutch “33” : Manufactured from high quality hard anodized aluminum, Sigma Slipper Clutches supplied by Spears Racing. Feature a six-ramp automatic ball bearing lift mechanism. Plug n' play installation - no subsequent adjustment is required. Designed to use standard clutch plate packs and springs. Some protection against excessive over reving if the rider accidentally changes down too many gears going into a corner.
SP20-320 Slipper $720.00 ea
Bored Yamaha R-3 Throttle Bodies:Spears Racing’s Preparation of the High Flow Throttle Bodies is a multi-step process that includes:boring, custom fit CAD designed throttle blades, reducing shaft profile (If needed), installing button head screws,milling topside and tumble polishing. By increasing air flow up to as much as 15 %, our throttle bodies improve low-end and mid-range power. This increase is immediately noticeable to the Racer/Rider.
SP22-Throttle Bodies R3 $475.00/ea.
Samco Sport Hose Kits: SamcoSport has been the world leader in Performance Silicone hose for over 10 years, supplying Formula One, NASCAR, and World Super Bike teams and our range of replacement hose kits, race parts and accessories is second to none. Samco Sport can offer you the best quality silicone hoses, for exceptional performance, and guaranteed reliability.(Stocking Blue)
SP38-320 clamps $14.95/Kit
Spears Racing swingarm spools:2015-2016 Yamaha YZF-R3. These spools have extra material on them to function as sliders to help protect your swingarm in a crash. They are CNC machined from black Delrin and have an aluminum base . Rust-proof 6x1.0mm mounting hardware are included. The grooves on these spools at the point of swingarm stand contact are deep so the engagement is solid, which makes it impossible for your bike to fall off the stand under normal use.
SPSwing arm Spools $20.00/set
Full Spectrum Power makes no compromise in the design and construction of their lightweight batteries. These batteries deliver the highest current, at consistent voltage, powering the world's fastest motorcycles. Full Spectrum Power is the only battery company in the powersports market that uses real, certified cells from A123 Systems. These are the finest cells on the planet.Every Full Spectrum Power battery is designed and manufactured in the USA, using engineering and assembly methods derived from years of working with factory race teams in AMA Superbike, Supercross, Motocross, Drag Racing, Land Speed Racing, and Flat Track. Technology which was only available to the factory teams is now available to everyone!
Pulse 1 $129.99/ea
SP-320 Chain Adjuster/Swingarm Spool Kit: This 2-piece kit is designed to keep your bike safe in the event of a crash as well as to give your bike a custom look that will make you stand out in the crowd. The aluminum base is 100% CNC machined from 6061 Aluminum billet to give you both great looks and exceptional strength.
SP320-Chain Adj/Spool Kit $49.00/set
This shock absorber features the Öhlins well-known Monotube design with its builds quality. With fully adjustable compression and rebound damping it has a great range of adjustments possible. With enhanced cornering performance and improved comfort it contributes to rider confidence which makes you want to go faster around the track. But the STX 46 does also work well for your daily commute and the weekend country road tour.Fully adjustable compression and rebound damping Wide range of springs available Every ÖHLINS shock is built to Spears Racing's specification and includes custom shock length, spring setup, and valving that is correct for your rider weight for Racing/Trackday and street riders.
SP-320 Ohlins $750.00
Galfer Full floating Rotor: To ensure optimum brake pad-to-rotor contact. Every high-quality, Galfer-patented Wave® rotor is made from a proprietary mix of virgin high carbon 420 stainless steel, laser cut (never stamped), double disc-parallel ground to assure perfect parallel flatness and heat treated to each specific application. KBA and TUV approved. Seamlessly replaces stock rotor. Made in our Galfer factory in Spain.
SP27-320 Galfer Rotor $275.40 Galfer Race Pads $38.89
Race Body Work:The Yamaha YZF-R3 is the perfect machine for any rider and capable of becoming a comparative weapon for any racer. Our high-quality bodywork not only performs to those standards, it’s priced for a privateer’s budget.
100% Customer Satisfaction Guarantee! Lightest bodywork available on the market,
Ultra Flexible for easy installation.Kevlar reinforced mounting areas.
Finished in an automotive grade urethane primer
SP320-Race Body Work $630.00/set